.png?width=25&height=25&name=icon-menu-grid-item-01%20(1).png){kind=icon}
MX Channel System
MX-R Roof Support
Supports & Suspensions
Fixings & Anchors
Pipework Products
Cable Containment
Threaded Fastners
Screws & Rivets
View all...
Design, Engineering & Fabrication
Newest Insights
Pipework products - July 20, 2022
Getting started with pre-fabricated pipe supports: 7 things to consider
You might think you’ve got the process of fabricating pipework down.
There’s always been a go-to method for it. Usually, it’s either taking measurements on site or using site drawings to size up the supports you need and then consulting a fabrication company to fabricate them.
7 min read
Offsite Construction, DfMA - July 8, 2022
CAD Technician Vs. Design Engineer; which is right for my M&E support designs?
4 min read
Design Automation - July 1, 2022
Will design automation tools play a part in the future of M&E supports?
6 min read
Compliance, Decking fixings - June 29, 2022
Getting started with decking fixings: what do I need to know?
6 min read
channel systems - June 22, 2022
Channel vs tested channel systems: what's the difference?
6 min read
Cable Containment - June 20, 2022
Cable tray vs cable basket vs cable ladder vs cable trunking: what’s the difference?
6 min read
Pipework products - June 15, 2022
Getting started with Pipe Insulation Blocks: What do I need to know?
6 min read
Offsite Construction, DfMA - May 30, 2022
Getting started with access platforms: what do I need to know?
4 min read
Compliance - May 27, 2022
What are the common misconceptions of bracketry for M&E installations?
5 min read
Offsite Construction, Compliance, Modular Steelwork - May 24, 2022
An honest review of Sikla Framo secondary modular steelwork
5 min read
channel systems - May 20, 2022
Tested Channel System: is it really necessary for my M&E installations?
6 min read
BS 8539, Concrete Screws, Anchors - May 18, 2022
Concrete screws vs wedge anchors vs throughbolts: what's the difference?
9 min read
BS 8539, Compliance, Anchors - May 17, 2022
Anchor installation training: do I really need it?
6 min read